Artesyn MITX-CORE-820 Installation and Use (July 2014) - Manual (Page 90)

BIOS
MITX-CORE-820 Installation and Use (6806800M10H) 90
5.4.2.8.4 SB Azalia Configuration
5.4.2.9 Network Configuration
5.4.2.10 AMT Configuration
Table 5-22 SB Azalia Configuration Field Description
Field Description
Azalia Controls detection of the Azalia device.
Azalia internal HDMI codec Enables/Disables internal HDMI codec.
Table 5-23 Network Configuration Field Description
Field Description
PCH Internal LAN Enables/Disables PCH Internal LAN
LAN OPROM Selection This is used to select LAN OPROM for quick boot minimal
configuration.
Wake on PCH LAN Enables PCH Internal wake on LAN capability.
Table 5-24 AMT Configuration Field Description
Field Description
Intel AMT Enables/Disables Intel(R) Active Management Technology BIOS
Extension. Note: iAMT H/W is always enabled. This option just
controls the BIOS extension execution. If enabled, this requires
additional firmware in the SPI device.
Intel AMT Hot Key Enables or Disables Intel® AMT Hot-Key during POST to enter
MEBX setup.
Intel AMT Setup Prompt Enables/Disables Intel® AMT Setup Prompt to wait for hot-key
to enter setup.