Artesyn MITX-CORE-820 Installation and Use (July 2014) - Manual (Page 62)

Functional Description
MITX-CORE-820 Installation and Use (6806800M10H) 62
4.11 USB 2.0
The MITX-CORE-820 implements four standard type A connectors located in the backpanel I/O
region of the motherboard. In addition, three standard.100"x.100" 10-pin, dual-row header
supporting dual-ports are located on the motherboard (see
Table 4-3 for pinout). The P25 of
the 10-pin headers provides mechanical support for retention standoff to support Intel® Z-
U130 Value Solid State Drive (standard profile). All USB ports, including the powered USB,
supports low-speed, full-speed, and high-speed using the USB 2.0 Enhanced Host Controller
Interface (EHCI).
Figure 4-5 shows the pinout of the connector.
Table 4-9 USB Internal Header (P24, P25, P26) Pinout
Pin Signal Pin Signal
1 +V5A 2 +V5A
3 USB_PN1 4 USB_PN2
5 USB_PP2 6 USB_PP2
7 GND 8 GND
9 NC 10 NC
Figure 4-5 USB Internal Header (P24, P25, P26)