Artesyn MITX-CORE-820 Installation and Use (July 2014) - Manual (Page 116)

Firmware
MITX-CORE-820 Installation and Use (6806800M10H) 116
6.3.2 PECI
EC should be able to read the CPU temperatures through the PECI interface. A PECI initialization
and a PECI polling function should be implemented. Samples of this include
OEM_PECI_Init(void) and OEM_PECI_Polling(void).
const PWRSEQ_DESCRIPTOR ResumeSeq_Table[] =
{
/* A B C D E */
{PORT_PIN(4, 4) | HIGH, 01, 0x01 | OUTPUT}, /* 0 - SUSON */
{PORT_PIN(4, 5) | HIGH, 01, 0x02 | OUTPUT}, /* 1 - MAINON */
{PORT_PIN(3, 0) | HIGH, 120, 0x03 | INPUT}, /* 2 - ALLPWROK */
{PORT_PIN(5, 0) | HIGH, 100, 0x04 | OUTPUT}, /* 3 - CPU_VR_ON */
{PORT_PIN(4, 7) | HIGH, 01, 0x7F | OUTPUT}, /* 4 - HW_PWRGD */
{UNUSED_PIN | LOW, 00, 0x00 | INPUT}, /* 5 - Reserved */
{UNUSED_PIN | LOW, 00, 0x00 | OUTPUT}, /* 6 - Reserved */
{UNUSED_PIN | LOW, 00, 0x00 | OUTPUT}, /* 7 - Reserved */
{UNUSED_PIN | LOW, 00, 0x00 | OUTPUT} /* 8 - Reserved */
};