Artesyn MITX-CORE-820 Installation and Use (July 2014) - Manual (Page 50)

Controls, LEDs and Connectors
MITX-CORE-820 Installation and Use (6806800M10H) 50
With the exception of the Mini-DIN DC-IN connector , LVDS, LVDS inverter connector and eDP
connector, all connectors used for the MITX-CORE-820 are standard connectors available in
the market. SATA power cables are provided with the MITX-CORE-820. Please contact your
local Artesyn representatives for information on the Mini-DIN DC-IN connector, LVDS, LVDS
inverter connector and eDP connectors.
3.3 LED Controls
The MITX-CORE-820 has one green LED and one red LED to indicate the charging and
discharging status. Only a charging board is needed for battery management as the LED is fully
controlled by the EC.
P23 CPU Fan Header See Fan Header, on page 66
J15 eDP Connector See Embedded Display Port (eDP), on page 58
J11 Audio Jack See Audio, on page 69
J13 DC-IN Jack See Power Supplies, on page 63
J12 ATX Power Supply Connector See Power Supplies, on page 63
Table 3-1 MITX-CORE-820 Connectors (continued)
Reference
Designator
Function Pinout Definition
Table 3-2 LED Control Indicator
Battery Status Green LED Status Red LED Status
Charging Inactive Active
Fully Charged Active Inactive
Discharging Inactive Inactive
Battery Low Inactive Blinking