Artesyn MITX-CORE-820 Installation and Use (July 2014) - Manual (Page 85)

BIOS
MITX-CORE-820 Installation and Use (6806800M10H) 85
5.4.2.4 Peripheral Configuration
5.4.2.5 HDD Configuration
C7s-State Enables processor idle power saving C7s state. If enabled, BIOS
will report C7s instead of C7 to OS.
Table 5-9 Processor Power Management Field Description
Field Description
Table 5-10 Peripheral Configuration Field Description
Field Description
Spread Spectrum Clock Enables clock chip spread spectrum feature.
PCIe SR-IOV Support Sets IO virtualization.
Table 5-11 HDD Configuration Field Description
Field Description
SATA Device Enables/Disable sSATA device.
Interface Combination Selects the SATA controllers operation mode.
RAID Alternate Device ID Changes the device ID to 292X from 282X in RAID mode to
prevent the IMSM driver from loading on the platform.
Software Feature Mask Config Software Feature Mask Config. See Software Feature Mask
Configuration .
Serial ATA Port 0 / Hard Disk 0 Displays the identity of the device attached.
Serial ATA Port 1 / Hard Disk 1 Displays the identity of the device attached.
Serial ATA Port 2 / Hard Disk 4 Displays the identity of the device attached.
Serial ATA Port 3 / Hard Disk 5 Displays the identity of the device attached.