Artesyn MITX-CORE-820 Installation and Use (July 2014) - Manual (Page 31)

Chapter 1
MITX-CORE-820 Installation and Use (6806800M10H) 31
Introduction
1.1 Overview
MITX-CORE-820 is an Artesyn designed Mini-ITX motherboard based on Intel® 6 Series Chipset
supporting Intel® Sandy Bridge Mobile rPGA Quad/Dual core processors.
1.2 Features
The following table lists the features of the MITX-CORE-820 motherboard.
Table 1-1 MITX-CORE-820 Features Summary
Function Features
CPU (rPGA988B Socket)  Supports one 45 W 4-core Core i7 Intel Sandy Bridge-Mobile
rPGA 988B embedded processor.
 Intel AMT 7.0, Turbo Boost
 Also provides the option to support one 35 W 2-core Core i5
Celeron Intel Sandy Bridge-Mobile PGA embedded processor.
Chipset Intel 6 Series PCH
Memory Feature  Supports up to 16GB dual-channel, non-ECC, unbuffered
DDR3 SO-DIMM
 Up to 1600 MT/s
Embedded Controller Nuvoton NPCE791C
Audio  Audio on board (ALC888S-VC)
 Rear Panel: 5 audio jacks + 1 SPDIF output, Front Panel: 2 re-
tasking audio jacks, 2nd SPDIF output header (optional)
LAN Intel WG82579LM, Intel WG82574L
USB High-speed Enhanced Host Controller interfaces (EHCI) that
supports 12 ports(4 rear/6 on header (one header can be used as
eUSB connector) /1 PCIe Mini Card/1 Display Mini PCIe Card)
Expansion slots 1x PCIe 16x Slot Supports Gen 2
Rear panel ports 4 USB2.0 ports, 2 Display Port, Audio Jack, DC-In Jack, 2 RJ-45 Ports
(one for MITX-CORE-810), VGA/COM Port
Power Connectors 12 V or 14.4-19.5 V DC-IN Jack / 4-pin ATX_12V connector. Only
one can be plugged at a time