7 pci express, 8 lan on motherboard, 7 pci express 4.8 lan on motherboard – Artesyn MITX-CORE-820 Installation and Use (July 2014) User Manual
Page 59

Functional Description
MITX-CORE-820 Installation and Use (6806800M10H)
59
4.7
PCI Express
The MITX-CORE-820 has one x16 5G PCI-Express slot which supports graphics cards up to 75 W
in power. The position of the PCI-Express slot follows the Mini-ITX Addendum Version 1.1 of the
microATX Motherboard Interface Specification Version 1.2.
The Cougar Point-mbl PCH has one x1 PCI-Express port (port 6) to the WG82579LM and one x1
PCI-Express port (port 3) to the WG82574L. Port 7 will be used for a PCI-Express Mini Card
connector for WiFi/WiMAX, port 8 is used for DMC card slot.
4.8
LAN on Motherboard
The MITX-CORE-820 provides two GbE ports. One port uses the Intel 6 Series PCH integrated
MAC and the Intel WG82579LM GbE PHY. The Intel WG82579LM is connected to PCH through
the 1x PCI-Express. The other Gbe port uses Intel WG82574L controller (MITX-CORE-820 only).
The design provides two RJ-45 connectors supporting 10/100/1000 Base T. LAN is powered by
suspend well to support AMT and wake-on-LAN while in S5. WG82579LM uses +V3.3 M and
WG82574L uses +V3.3 A.
LAN connector has two integrated LEDs.
A single green LED
–
OFF (no light) - LAN link is not established
–
ON (steady light) - LAN link is established
–
Blinking - indicates LAN link activity
18
DP_TXN1
38
SMB_THRM_CLK
19
DP_TXP1
39
SMB_THRM_DATA
20
GND
40
GND
Table 4-5 eDP Connector (J15) (continued)
Pin#
Signal Name
Pin#
Signal Name