3 display port, 4 embedded display port (edp), 3 display port 4.6.4 embedded display port (edp) – Artesyn MITX-CORE-820 Installation and Use (July 2014) User Manual
Page 58: Table 4-5, Edp connector (j15), Functional description
Functional Description
MITX-CORE-820 Installation and Use (6806800M10H)
58
4.6.3
Display Port
There are two display ports (DP) on the rear IO. It follows the DP specifications V1.1 and has the
ability to support dual-mode DP. An HDMI monitor can be connected to the DP port using a
DP-to-HDMI adapter. There is also a dedicated DP port to DMC slot.
4.6.4
Embedded Display Port (eDP)
The product provides a eDP interface which can connect to a Flat-Panel Display (FPD) with 30-
pin/40-pin eDP connector for LED backlight with LED Driver on PCB for the Embedded Display
Port Spec v1.1. The interface can support 1, 2 or 4 lanes eDP with up to 2.7 Gb/s per lane.
Table 4-5 eDP Connector (J15)
Pin#
Signal Name
Pin#
Signal Name
1
VDD_LVDS
21
DP_TXN0
2
VDD_LVDS
22
DP_TXP0
3
VDD_LVDS
23
GND
4
VDD_LVDS
24
EMB_AUXP
5
VDD_LVDS
25
EMB_AUXN
6
GND
26
GND
7
GND
27
V3.3S
8
GND
28
V12S
9
GND
29
GND
10
EMB_HPD
30
GND
11
GND
31
V5S
12
DP_TXN3
32
V5S
13
DP_TXP3
33
L_BKLT_CTRL
14
GND
34
L_BKLT_EN
15
DP_TXN2
35
V12S
16
DP_TXP2
36
V3.3S
17
GND
37
GND