Artesyn MITX-CORE-820 Installation and Use (July 2014) - Manual (Page 41)

Hardware Preparation and Installation
MITX-CORE-820 Installation and Use (6806800M10H) 41
2.2 Unpacking and Inspecting the Board
Read all notices and cautions prior to unpacking the product.
Shipment Inspection
1. Verify that you have received all items of your shipment.
 Quick Start Guide and Safety Notes summary
 Motherboard
 Two SATA power Cables
 Two SATA data cables
 Driver CD
 I/O Shield
SODIMM 5W (Two SODIMMs) Tc=85
WG82574L 0.473W Tc=109
WG82579LM 0.659W Tc=106
Table 2-2 Power Dissipation of Critical Components
Part TDP (W) Operation Limit (C)
Damage of Circuits
 Electrostatic discharge and incorrect installation and removal of the product can
damage circuits or shorten its life.
 Before touching the product make sure that you are working in an ESD-safe
environment or wearing an ESD wrist strap or ESD shoes. Hold the product by its edges
and do not touch any components or circuits.