Artesyn ATCA-MF106 Installation and Use (September 2014) - Manual (Page 70)

Firmware Upgrade Facility
ATCA-MF106 Installation and Use (6806800M62B) 70
6.4 fcu—Firmware Upgrade Command-Line Utility
Description
The Firmware Upgrade Command-line Utility (FCU) allows you to:
 Query the current versions of firmware installed on the Shelf Manager and determine
which firmware devices are active.
 Verify that a specified upgrade image is sound and compatible with the current hardware.
 Upgrade a firmware image.
 Mark a device to be used as the boot source on the next reset.
By default, the FCU binary executable is installed in /opt/bladeservices/bin. This directory has
been added to the PATH environment variable.
The FCU verify and upgrade operations require specially prepared FRI files or HPM files (see
Firmware Recovery Image Files on page 69 ).
Synopsis
fcu --help [-t]
fcu --version
fcu -q [-d ] [-t]
fcu -v -f [-t]
fcu -u -f [-t]
fcu -a -f
fcu -m -b -d [-t]
fcu -s -f
fcu --activate -b -d
Parameters
-a
--full-upgrade