Artesyn ATCA-MF106 Installation and Use (September 2014) - Manual (Page 11)

ATCA-MF106 Installation and Use (6806800M62B) 11
About this Manual
Overview of Contents
This manual is intended for users qualified in electronics or electrical engineering. Users must
have a working understanding of AdvancedTCA and telecommunications. This manual
provides the information you need to install, access and operate the shelf manager & hub
board ATCA-MF106. Additionally you need the System Management Interface Based on HPI-B
(Centellis CO 31kX/4100/2000) User’s Guide to adopt the hardware platform interface.
The manual contains the following chapters and appendices:
 About this Manual on page 11 lists all conventions and abbreviations used in this manual
and outlines the revision history.
 Safety Notes on page 17 describes the safety information which has to be regarded.
 Sicherheitshinweise on page 21 provides a German translation of the chapter "Safety Notes".
 Introduction on page 27 gives an overview of the product.
 ATCA-MF106 Hardware on page 43 provides detailed hardware information of the product.
 Controls, Indicators and Connectors on page 51 describes external interfaces of the product,
this includes connectors and LEDs.
 Board Exchange on page 55 describes the exchange prerequisites and procedures.
 Shelf Manager File System on page 63 provides information on persistent file support and
use cases.
 Firmware Upgrade Facility on page 69 provides a uniform way to upgrade firmware on
Artesyn hub blades, node blades, and AMC modules.
 Related Documentation on page 83 lists related documentation and specifications.