Artesyn ATCA-MF106 Installation and Use (September 2014) - Manual (Page 40)

Introduction
ATCA-MF106 Installation and Use (6806800M62B) 40
1.4 Standard Compliances
The ATCA-MF106, when installed in a compliant chassis, meets the following standards:
Table 1-1 Standard Compliances
Standard Description
UL 60950-1
EN 60950-1
IEC 60950-1
CAN/CSA C22.2 No 60950-1 Legal safety requirements
CISPR 22
CISPR 24
EN 55022
EN 55024
FCC Part 15
Industry Canada ICES-003
VCCI Japan
AS/NZS CISPR 22
EN 300 386
NEBS Standard GR-1089 CORE Legal EMC requirements on system level (predefined
Artesyn Embedded Technologies system)
ANSI/IPC-A610 Rev.C Class 2
ANSI/IPC-7711
ANSI/IPC-7721
ANSI-J-001...003 Manufacturing requirements
NEBS Standard GR-63-CORE
ETSI EN 300 019 series Environmental requirements
PICMG 3.0 R3.0 Defines mechanics, blade dimensions, power distribution,
power and data connectors, and system management
 The product has been designed to meet the directive on the restriction of the use of
certain hazardous substances in electrical and electronic equipment (RoHS) Directive
2002/95/EC.
 The ATCA-MF106 can be operated from -5 ºC up to +55 ºC without forced cooling.