AMETEK BPS Series - Manual (Page 81)

User Manual AMETEK Programmable Power
BPS Series 81
SAVE REGISTER Save present instrument setup to a register number selected by the
user. The numeric data entry keypad should be used to enter a number
between 0 and 15. Once the ENTER key is pressed, all settings are
saved. A message will appear at the bottom of the screen to confirm
the save operation.
RECALL REGISTER Recall instrument setup from a register number selected by the user.
The numeric data entry keypad should be used to enter a number
between 0 and 15. Once the ENTER key is pressed, all settings are
recalled. A message will appear at the bottom of the screen to confirm
the recall operation.
VIEW/EDIT REGISTER The View/Edit entry can be used to display the contents of a setup
register before it is recalled. After the user enters a register number to
view or edit and presses the ENTER key, the PROGRAM screen will
appear. All parameters that will be changed by recalling the register
will be blinking. If ENTER is pressed again, the register will be
recalled and the new values take effect. To edit the register content,
change all parameters that need to be changed. Pressing ENTER will
save the new values and make them active.