AMETEK BPS Series - Manual (Page 22)

AMETEK Programmable Power
BPS Series User Manual M440077-01 Rev A 22
2.6.2 -LF Option Specifications
The -LF option limits the maximum available output frequency to 500 Hz. All other specifications of the
BPS system remain unchanged if this option is installed.
2.7 Supplemental Specifications
Supplemental specifications are not warranted and generally reflect typical performance characteristics.
These characteristics have been checked on a type test basis only and are not verified on each unit
shipped. They are provided for reference only.
2.7.1 Output
Output Parameter BPS30 – BPS180
Voltage:
Slew rate: > 0.5 V/micro sec
Stability: 0.25 % over 24 hour period at constant line, load and temperature.
Settling time: < 0.5 msec
Frequency:
Temperature
coefficient:
 5ppm per degree C
Stability:
 15 ppm per year
Current:
Constant Power Mode: Operation at higher currents but constant power is possible from 80% of Voltage
range (125% of max. current) declining to 100% of maximum current at 100 % of
voltage range for short periods of time or at reduced ambient temperatures. (< 15
mins @ 30° C). See Figure 2-1 and Figure 2-4.
2.7.2 Acoustic Noise Levels
Acoustic Noise: Measured at a distance of one meter. (3 ft.)
Front 63 dBA at no load to 68 dBA at full load.
Back 65 dBA at no load to 72 dBA at full load