AMETEK BPS Series - Manual (Page 17)

AMETEK Programmable Power
BPS Series User Manual M440077-01 Rev A 17
2.1.5 Unit Protection
Input Over current: In-line fast acting fuses. Check fuse rating in Service and Maintenance section.
Ratings will depend on AC input configuration settings.
Circuit breaker for LV supply.
Input Over voltage: Automatic shutdown.
Input Over voltage
Transients: Surge protection to withstand EN50082-1 (IEC 801-4, 5) levels.
Output Over current: Adjustable level constant current mode with programmable set point.
Output Short Circuit: Peak and RMS current limit.
Over temperature: Automatic shutdown.
2.2 Mechanical
Parameter Specification
Dimensions:
(for each BPS 30 / BPS45
chassis)
Height: 50.0” 1270 mm
Width: 28.75” 731 mm
Depth: 34.5” 876 mm
Unit Weight:
(for each BPS30/BPS45
chassis) Net: 1150 lbs / 522 Kg approximately
Shipping: 1231 lbs / 560 Kg approximately
Dimensions:
(for each BPS75 / BPS90
chassis) Height: 74.5” 1892.3 mm
Width: 30.3” 769.6 mm
Depth: 38.3” 972.8 mm
Unit Weight:
(for each BPS75 / BPS90
chassis) Net: 2150 lbs / 975 Kg approximately
2475 lbs / 1123 Kg approximately
Shipping: 2450 lbs / 1111 Kg approximately
2775 lbs / 1258 Kg approximately
Material: Steel or aluminum chassis, panels and covers.
Finish: Light textured painted external surfaces.
Panels semi-gloss polyurethane color no. 26440 (medium gray)
Cooling: Fan cooled with air intake on the front and exhaust to the rear.
Fans:
14 x 225CFM.
Air displacement 50 Cu Ft/sec. Max.
Internal Construction: Modular sub assemblies.
Rear Panel
Connections:
(See section 3and 4 for description of connections)

Cable entry and strain relieve for AC input wiring

Cable entry and strain relieve for AC output wiring

External sense terminal block (Remote voltage sense)

System interface (2x)

RS232, USB, GPIB, LAN (option)

Trigger In BNC

Trigger Out BNC

Function Strobe BNC

Output Status