AMETEK BPS Series - Manual (Page 51)

User Manual AMETEK Programmable Power
BPS Series 51
4.7.5 RS232C Serial Interface Connector
An RS232 serial interface connector is located on the rear panel on all models.
Pin Name Direction
1 N/C
2 TxD Output
3 RxD Input
4 N/C
5 Common Common
6 N/C
7 CTS Input
8 RTS Output
9 N/C
Table 4-9: RS232 Connector pin out – BPS Series with RS232 and USB.
The BPS Series models RS232 interface use a straight through DB9 male to DB9 female serial cable,
which is supplied in the BPS ship kit for these models.