AMETEK BPS Series - Manual (Page 56)

User Manual AMETEK Programmable Power
BPS Series 56
Figure 4-11: Functional Test Setup.
4.10 Remote Inhibit / Remote Shutdown
It may be necessary to provide a remote shutdown of the AC output of the BPS. The external remote
inhibit input may be used for this purpose (RI). This input is also referred to as remote shutdown.
The default mode of operation for the RI input is a contact closure between pins 5 and 6 (return) of the
rear panel screw-terminal strip. This will open the output relay of the BPS.