AMETEK BPS Series - Manual (Page 61)

User Manual AMETEK Programmable Power
BPS Series 61
5.1.5 FUNCTION Keypad
The function keypad provides access to all menus and measurement screens.
Note: Not all screen functions indicated in this section of this manual are available on the BPS model
power source. Consult factory for further information about any additional options.
The following keys are located in the FUNCTION keypad:
MENU PROG WAVE MEAS
OUTPUT
ON/OFF
PHASE SET +/-
FUNCTION
Figure 5-2: FUNCTION Keypad
KEY DESCRIPTION
MENU The top level menu is accessed by pressing the MENU key. Three
shortcut keys are used to provide direct access to the PROGRAM,
WAVEFORM, and MEASUREMENT screens as these are among the
most frequently used screens. Thus, instead of going through the main
menu to reach the PROGRAM, WAVEFORM, and
MEASUREMENT screens, they can be accessed directly by pressing
the PROG, WAVE, and MEAS keys respectively. A map of the Main
menus is provided on the next few pages. There are three top level
menus in the BPS Series.
PROG The PROG key is a shortcut to access the PROGRAM menu directly.
The PROGRAM menu is one of the most frequently used menus.
Thus, instead of going through the main menu to reach the
PROGRAM menu, it can be accessed directly by pressing the PROG
key.
WAVE The WAVE key is a shortcut to access the WAVEFORM screen
directly. The WAVEFORM screen is used to select a user defined
arbitrary waveform.
MEAS The MEAS key is a shortcut to access the MEASUREMENT screen
directly. The MEASUREMENT screen is one of the most frequently
used screens. Thus, instead of going through the main menu to reach
the MEASUREMENT screen, it can be accessed directly by pressing
the MEAS key.