AMETEK BPS Series - Manual (Page 63)

User Manual AMETEK Programmable Power
BPS Series 63
5.1.6 DECIMAL KEYPAD
The decimal keypad may be used to enter any numeric parameter required in any of the menu fields.
Several fields accept input from either the keypad or the knob. Data entered from the keypad is normally
accepted once the ENTER key is pressed unless the front panel mode is in the SET mode. The following
keys are available on the decimal keypad:
7
ENTRY
E
N
T
E
R
8 9
4 5 6
1 2 3
. 0
Figure 5-3: Entering Values from the Decimal Keypad
CURSOR UP The UP key moves the cursor position upwards one position to the
previous available cursor position. If the present cursor position is at
the top of the right hand column, the cursor is moved to the bottom
position of the left hand column. If the present cursor is at the top of
the left hand column, the cursor is moved to the bottom of the right
hand column. Figure 5-4 depicts the cursor movement through a two
column menu.
Figure 5-4: Cursor UP Key Movement
CURSOR DOWN The DOWN key moves the cursor position downwards one position to
the next available cursor position. If the present cursor position is at
the bottom of the left hand column, the cursor is moved to the top
position of the right hand column. If the present cursor is at the bottom
of the right hand column, the cursor is moved to the top of the left
hand column. Figure 5-5 depicts the cursor movement through a two-
column menu.