AMETEK BPS Series - Manual (Page 75)

User Manual AMETEK Programmable Power
BPS Series 75
REPEAT This is the number of times the SURGE/SAG transient event will
repeat before it will proceed to the next event or exit the transient
program. Note that the number of times the transient event is
generated is equal to the REPEAT + 1. Leave this value at zero if only
one execution of this event in the list is required.
EVENT # This must be the last item in the transient edit screen. All data fields
must be entered before inserting the EVENT #. The EVENT # takes a
value from 1 to 99. The EVENT # defines the order of execution of
the transient events in a multiple event transient. It is a good practice
to enter spaced EVENT #’s to allow insertion of an EVENT later if
needed. (For example, space them by 5.) Entry of a sequence EVENT
# number will cause the display to return to the TRANSIENT screen.