Adtec digital DTA-3050 (version 6.02.14) Manual - Manual (Page 89)

GIGE Output
GIGE route egress up to 280 Mbs •
Any input service(s), SPTS or MPTS can be re-multiplexed into the many SPTS or MPTS GIGE routes. •
Tables per DTA GIGE route (MANY GIGE routes per DTA, each route may be a SPTS or MPTS)
One PAT, CAT per route. ♦
A PMT per service per route. ♦
by format: ♦
•
Format Tables Allowed per route
DVB
1. One SDT per route
a. Lists all services included within a route
2. One NIT per route
a. Lists RF parameters per route
b. Lists all services included within a route
3. One EIT per route
a. Provides event information (guide) data within a route
b. Pass or Local generation
4. One TDT/TOT per route
ATSC
1. One MGT per route
a. xVCT
2. One STT per route
3. One RRT per route
4. Four (minimum) EITs (One for each 3 hour block) per route
a. Up to 128 EITs (16 days) are supported per ATSC A65/B
b. Pass and/or Local generation
5. Four ETTs (One for each EIT) per route
a. 128 ETTs (16 days) are supported per ATSC A65/B
b. Pass and/or Local generation
Output Ciphering
The DTA provides DVB-CSA and AES ciphering:
Ethernet Simylcrypt and Multicrypt support per ETSI103197. •
DVB-CSA and AES are supported via ASI output and per GIGE route. •
Appendix 78