Manual upgrades – Adtec digital DTA-3050 (version 6.02.14) Manual User Manual
Page 72

Manual Upgrades
Important Notes
This upgrade must be executed from the local area network that the unit- or units- are attached to.
There is a limitation in the Units FTP server and it does not work through NAT devices.
♦
Please turn off any personal firewall software before running the upgrade.
If you do not want to turn off personal firewalls, then ports 43 and 79 must be opened up.
◊
♦
•
Upgrading the Unit
Follow these steps:
Step
Action
1
Save the file to your PC.
2
Run the file.
3
When the command prompt window opens type ' upgrade ', press the space bar, type your unit's IP address, and
press < Enter>.
Example: C:\DTA_Upgrade\upgrade 192.168.10.48
4
Follow on the screen prompts.
Restoring the Backup
The upgrade creates a tar file at the root of the file system. The file is named
un-tared and the unit will revert to the previous state.
In the event you want to revert back to the old version and configuration, here are the steps to restore the unit to the previous
state:
Step
Action
1
rcasimux stop
2
cd /
3
pwd.
This MUST respond with / this command lets you know what directory you are in.
You must be in the root of the filesystem, which is '/ not root'.
4
tar –xvzf
5
shutdown –rn now
The steps outlined above will un-tar the back-up, including the configuration. Additional Support Contact Support
(615-256-6619 or 904-720-2003 x 241) if you have any problems with the upgrade.
63
User Interface