Adtec digital DTA-3050 (version 6.02.14) Manual - Manual (Page 27)

Using the GUI Interface
Introduction
The Adtec DTA3050 features an on-board Graphical User Interface for easy operability.
To access the GUI, bring up a web browser, such as Internet Explorer, Netscape Navigator, or Mozilla Firefox, and type your
DTA's IP address into the URL locator, and press "Enter". The DTA's on-board GUI will launch, displaying a page like this:
This page lists basic version and operating time information for the unit, and contains a login window. "USER" (in all caps) is
the default login password.
Also on this screen (and repeated on every screen) is a Status snapshot window, giving current status for ASI Data, ASI Fill,
IPTV, and Redundancy.
The GUI enables you to interface with the DTA3050 through 11 screens. These screens are accessed with the navigation
buttons in the left-hand window. These buttons are labelled:
System •
Host •
Inputs •
Mappings •
Outputs •
Tables •
CA •
IP Destinations •
MPE •
Redundancy •
Logs •
User Interface 24