Using xcrypt with the dta3050 – Adtec digital DTA-3050 (version 6.02.14) Manual User Manual
Page 77

Using XCrypt with the DTA3050
In addition to functioning as a MUX for Digital Turn Around, the DTA3050 can also function as a scrambler with many
Conditional Access systems. This article describes setting the DTA3050 to scramble using XCrypt.
This article should be considered a DRAFT; actual procedures may vary based on local installation.
Network Communications
Communications between the DTA and XCrypt server are to reside on the management network (eth0). TSOIP is to reside on
the Media network (eth1, aka GIG-E). These networks must be separated physically.
Configure CA for XCrypt
Main Window shown
Operations
68