Adtec digital DTA-3050 (version 6.02.14) Manual - Manual (Page 53)

Each of the four tables contains specific information. General Table
Data Function
Name IP destination address
Modulation Target modulation type; recommended to be set to manual
IPA destination's IP domain
Bit Rate rate of transport in bits per second
Port port assignment on the DTA this stream is using
IP TTL time-to-live
Src Port sets the Source Port stamp in the header packet
State on or off (enablement)
Programs Table
Lists assigned programs.
Tables Table
Data Function
Type table format selected
PAT
Program Association Table; lists all the programs contained in the transport stream; shows the PID value for the PMT
associated with each program.
The PAT is always found on PID 0x0000.
DVB-NIT Table
Data Function
Enable on or off
Network Name user-entered; Network's name as appears in program guides
NIT Rate frequency with which an NIT is sent in the stream
Network ID ID code of the network
Symbol Rate gross bit rate of the stream
Original Network ID network ID code as used by the signal's provider
RF Frequency RF frequency of the carrier being streamed through the DTA
User Interface 46