Adtec digital DTA-3050 (version 6.02.14) Manual - Manual (Page 39)

Description:
Control Type Options Function
ASI Radio button selected/not turns ASI on or off
SMPTE-310M Radio button selected/not
turns SMPTE-310M on or off
See cautionary note below.
Format
pull-down
menu 188 (bytes)
204 (bytes)
MPEG mode
Modulation Target
pull-down
menu
Manual
(recommended)
8 QAM modulations
QPSK
8PSK
modulation of output
Refer to the Modulation Targets Reference for more
information.
Egress Clock
Mode pull-down
menu
Burst
Byte
Off
type of stream to be multicast
byte - evenly spaced bytes; restricts unit to a clock range of
0.3 Mbps to 50.0 Mbps
burst - each byte transmits back-to-back; range is 2.4 Mbps
to 213.0 Mbps.
Manual Rate text box user-defined
bit per second rate of output defined by user
Refer to the Modulation Targets Reference for more
information.
Caution: after changing from SMPTE to ASI, or from ASI to SPMPTE, the device must be rebooted.
User Interface 34