Adtec digital DTA-3050 (version 6.02.14) Manual - Manual (Page 34)

Inputs Screen
The Inputs screen the settings and function of the 10 ASI inputs featured on the DTA3050. For each input, the following is
listed:
Data Function
State status of the input; active port, inactive port, or inactive due to stream issue
Format bytes of incoming data per DVB packet; will display 188 or 204
Mode type of signal the DTA is passing
Redundancy this is an on/off indicator signifying whether the feature is enabled/disabled for this input
Data Rate quantity of data coming in, measured in Mbps
Fill Rate quantity of fill packets in Mbps
Total Rate sum of data rate and fill rate
Logged In
When logged into the unit, the Inputs screen offers two levels of access to the unit's programming. The first level looks much
like the screenshot above, with the addition of a clickable "Edit" control:
Screenshot- Inputs Level 1: Portion of Main Window shown
When is clicked for a given input, this screen is displayed:
29 User Interface