Adtec digital DTA-3050 (version 6.02.14) Manual - Manual (Page 20)

Administrator Mode
Important: As of Release v.5, all Adtec DTA3050 units are shipped with auto log-out time set to "None". The unit can be
configured by any user without going through a log-in procedure.
To set up an auto-time out:
Step Action
1 Press the arrow twice, until the panel reads "Auto Logout Time".
2 Press until the cursor appears on the word "NONE".3Use the and to select a time from 1-9 (minutes).4Press .5 takes you back to the "Status" menu. Logging In: If you must log back in after being timed out, you must log into the unit from the front panel as an administrative
user. The default front panel login password is "USER".To log in, press the following key sequence:StepAction1Press UP arrow2Press SELECT3Press ENTER4Press RIGHT arrow5Press ENTEROnce logged into the unit as an administrative user, the entire suite of configuration possibilities is unlocked for use. Note that
changes made in Administrator Mode are not permanent until a "save all" command is executed or until the menu times out
and returns to Status mode.17 Getting Started Pages: 1 … 18 19 20 21 22 … 94 wrong Brand wrong Model non readable See also other documents in the category Adtec digital Video: DPI-1200 (version 01.04.08U) Quick Start (2 pages) DPI-1200 (version 01.04.08U) Manual (58 pages) mediaHUB-HD 422 (version 1.01.10_M_2) Quick Start (2 pages) mediaHUB-HD 422 (version 1.01.10_M_2) Quick Start (67 pages) mediaHUB-HD 422 (version 1.01.10_M_2) Quick Start (68 pages) mediaHUB-HD 422 (version 1.01.10_M_2) Quick Start (2 pages) mediaHUB-HD 422 (version 1.01.10_M_2) Quick Start (2 pages) EN-80 (version 2.02.28) Quick Start (2 pages) EN-30 (version 1.02.02) Manual (59 pages) RD-30 (version 2.1.1) Quick Start (1 page) RD-30 (version 2.1.1) Manual (39 pages) mediaHUB-HD 422 (version 1.01.10_M_2) Quick Start (2 pages) mediaHUB-HD 422 (version 1.01.10_M_2) Quick Start (2 pages) mediaHUB-HD 422 (version 1.01.10_M_2) Quick Start (2 pages) YUV2QAM (version 01.02.01) Manual (46 pages) Soloist-HD Pro (version 02.07.09) Manual (77 pages) EN-91 / EN-91P (version 1.02.29) Quick Start (2 pages) EN-20 (version 2.03.06) Manual (63 pages) mediaHUB-HD Pro (version 03.07.19) Studio Encoder Quick Start (2 pages) RD-60 (version 1.13.02) Quick Start (2 pages) edje-5110 (version 01.02.05) Manual (98 pages) eyeMonitor (42 pages) TBGS w/adManage (50 pages) Soloist 4111 (version 02.07.03) (1 page) EN-40 (version 2.02.24) (2 pages) mediaHUB (version 02.00.13) (24 pages) edje-5110 (version 01.02.05) Quick Start (2 pages) MAS & iptvManage (44 pages) AVS2 (5 pages) mediaHUB-HD 422 (version 1.01.10_M_2) Manual (104 pages) Sitemap
3 Use the and to select a time from 1-9 (minutes).
4 Press .
5 takes you back to the "Status" menu.
Logging In: If you must log back in after being timed out, you must log into the unit from the front panel as an administrative
user. The default front panel login password is "USER".
To log in, press the following key sequence:
Step Action
1 Press UP arrow
2 Press SELECT
3 Press ENTER
4 Press RIGHT arrow
5 Press ENTER
Once logged into the unit as an administrative user, the entire suite of configuration possibilities is unlocked for use. Note that
changes made in Administrator Mode are not permanent until a "save all" command is executed or until the menu times out
and returns to Status mode.
17 Getting Started