Statement of china-rohs compliance, Statement of china-rohs compliance –60 – Altera Stratix IV E FPGA Development Board User Manual
Page 68

2–60
Chapter 2: Board Components
Statement of China-RoHS Compliance
Stratix IV E FPGA Development Board Reference Manual
May 2011
Altera Corporation
lists the power measurement ADC component reference and
manufacturing information
Statement of China-RoHS Compliance
Table 2–55
lists hazardous substances included with the kit.
3
2.5V_B4B
2.5
VCCIO_B4B
Bank 4B I/O power (Character LCD, HSMA)
4
1.5V_1.8V_B2
1.5
VCCIO_B2
Bank 2 I/O power (RLDRAM II CIO)
5
2.5V_VCCPD
VCCPD
I/O pre-drivers power
6
VCCL
0.9
VCC
FPGA core and periphery power
7
VCCPT
1.5
VCCPT
Programmable power technology
8
VCCD_PLL
0.9
VCCD_PLL
Digital PLL power
9
2.5V_A_SENSE
2.5
VCCA_PLL
Analog PLL power
10
2.5V_VCCPGM
2.5
VCCPGM
Configuration pins power
11
2.5V_VCC_CLKIN
2.5
VCC_CLKIN
Differential clock power for top and bottom
I/O banks
12
2.5V_B1_B8
2.5
VCCIO_B1
Bank 1 I/O power (Graphics LCD, Ethernet,
and seven-segment display)
VCCIO_B8
Bank 8 I/O power (FSM bus and user LEDs)
Table 2–53. Power Rail Measurements Based on the Rotary Switch Position (Part 2 of 2)
Switch
Schematic Signal Name
Voltage (V)
Device Pin
Description
Table 2–54. Power Measurement ADC Component Reference and Manufacturing Information
Board Reference
Description
Manufacturer
Manufacturing
Part Number
Manufacturer
Website
U23, U25
8-channel differential 24-bit ADC
Linear Technology
LTC2418CGN#PBF
Table 2–55. Table of Hazardous Substances’ Name and Concentration
Notes
(1)
,
(2)
Part Name
Lead
(Pb)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr6+)
Mercury
(Hg)
Polybrominated
biphenyls (PBB)
Polybrominated
diphenyl Ethers
(PBDE)
Stratix IV E FPGA development
board
X*
0
0
0
0
0
12 V power supply
0
0
0
0
0
0
Type A-B USB cable
0
0
0
0
0
0
User guide
0
0
0
0
0
0
Notes to
Table 2–55
:
(1) 0 indicates that the concentration of the hazardous substance in all homogeneous materials in the parts is below the relevant threshold of the
SJ/T11363-2006 standard.
(2) X* indicates that the concentration of the hazardous substance of at least one of all homogeneous materials in the parts is above the relevant
threshold of the SJ/T11363-2006 standard, but it is exempted by EU RoHS.