Program a device, Implement your design, Set up licensing – Altera QDRII SRAM Controller MegaCore Function User Manual
Page 31
Altera Corporation
MegaCore Version 9.1
2–21
November 2009
QDRII SRAM Controller MegaCore Function User Guide
Getting Started
Program a
Device
After you have compiled the example design, you can perform gate-level
simulation (refer to
“Simulate the Example Design” on page 2–11
) or
program your targeted Altera device to verify the example design in
hardware.
With Altera's free OpenCore Plus evaluation feature, you can evaluate the
QDRII SRAM Controller MegaCore function before you obtain a license.
OpenCore Plus evaluation allows you to generate an IP functional
simulation model, and produce a time-limited programming file.
f
For more information on OpenCore Plus hardware evaluation using the
QDRII SRAM Controller MegaCore function, refer to
“OpenCore Plus Time-Out Behavior” on
.
Implement Your
Design
To implement your design based on the example design, replace the
example driver in the example design with your own logic.
Set Up Licensing
You need to obtain a license for the MegaCore function only when you are
completely satisfied with its functionality and performance, and want to
take your design to production.
After you obtain a license for QDRII SRAM Controller, you can request a
license file from the Altera web site
and
install it on your computer. When you request a license file, Altera emails
you a license.dat file. If you do not have Internet access, contact your
local Altera representative.