Altera Internal Memory (RAM and ROM) IP Core User Manual
Page 37
Parameter
Legal Values
Description
Which ports should be registered?
When you select With one read port and one write
port, the following options are available:
• ‘data’, ‘wraddress’, and ‘wren’ write input ports
• ‘raddress’ and ‘rden’ read input port
• Read output port(s) ‘q’
When you select With two read/write ports, the
following options are available:
• ‘data_a’, ‘wraddress_a’, and ‘wren_a’ write input
ports
• Read output port(s) ‘q’_a and ‘q_b’
On/Off
Specifies whether to register
the read or write input and
output ports.
More Options
When you select
With one read port
and one write port,
the following options
are available:
• ‘data’ port
• ‘wraddress’ port
• ‘wren’ port
• ‘raddress’ port
• ‘q_b’ port
When you select
With two read /
write ports, the
following options are
available:
• ‘data_a’ port
• ‘data_b’ port
• ‘wraddress_a’
port
• ‘wraddress_b’
port
• ‘wren_a’ port
• ‘wren_b’ port
• ‘q_a’ port
• ‘q_b’ port
On/Off
The read and write input
ports are turned on by
default. You only need to
specify whether to register
the Q output ports.
Create one clock enable signal for each clock signal.
On/Off
Specifies whether to turn on
the option to create one
clock enable signal for each
clock signal.
4-12
RAM: 2-Port IP Core Parameters
UG-01068
2014.12.17
Altera Corporation
Embedded Memory Signals and Parameters