beautypg.com

Altera SoC Embedded Design Suite User Manual

Page 82

background image

To run the sample application, perform the following steps:
1. In the Eclipse IDE, click Run > Debug Configurations... to open the Debug Configurations dialog

box.

2. In the Connection tab in the Debug Configurations dialog box, ensure the selected target is Altera >

Cyclone V > Bare Metal Debug > Debug Cortex-A9_0 via Altera USB-Blaster.

3. Under Connections tab, click Browse to select the USB Blaster connection.

Figure 4-40: Debug Configurations

4. In the Select Debug Hardware dialog box, select the desired USB Blaster and click OK.

ug-1137

2014.12.15

Running the Hardware Library Sample Application

4-63

Getting Started Guides

Altera Corporation

Send Feedback