Altera SoC Embedded Design Suite User Manual
Page 175

BSP Setting
Type
Default Value
Description
spl.CROSS_COMPILE
String
arm-
altera-
eabi
This setting specifies the cross
compilation tool chain for use.
spl.boot.BOOT_FROM_QSPI
(1)
Boolean False
This setting loads the boot loader
image from QSPI.
spl.boot.BOOT_FROM_SDMMC
(2)
Boolean True
This setting loads the subsequent
boot image from Secure Digital/
MultiMediaCard (SD/MMC).
spl.boot.BOOT_FROM_RAM
(3)
Boolean False
This setting loads the subsequent
boot image from RAM.
spl.boot.BOOT_FROM_NAND
Boolean False
This setting loads the subsequent
boot image from NAND.
spl.boot.QSPI_NEXT_BOOT_IMAGE
Hexadec
imal
0x60000
This setting specifies the location
of the subsequent boot image in
QSPI.
spl.boot.SDMMC_NEXT_BOOT_IMAGE
Hexadec
imal
0x40000
This setting specifies the location
of the subsequent boot image in
SD/MMC.
spl.boot.NAND_NEXT_BOOT_IMAGE
Hexadec
imal
0xC0000
This setting specifies the location
of the subsequent boot image in
NAND.
spl.boot.FAT_SUPPORT
Boolean False
Enable FAT partition support
when booting from SDMMC.
(1)
• When using bsp-create-settings or bsp-update-settings, you must turn off the boot option that is
currently turned on before you can turn on a different boot option.
• When using bsp-editor , only one of these options can be turned on at a time:
spl.boot.BOOT_FROM_
QSPI
,
spl.boot.BOOT_FROM_SDMMC
, or
spl.boot.BOOT_FROM_RAM
.
(2)
• When using bsp-create-settings or bsp-update-settings, you must turn off the boot option that is
currently turned on before you can turn on a different boot option.
• When using bsp-editor , only one of these options can be turned on at a time:
spl.boot.BOOT_FROM_
QSPI
,
spl.boot.BOOT_FROM_SDMMC
, or
spl.boot.BOOT_FROM_RAM
.
(3)
• When using bsp-create-settings or bsp-update-settings, you must turn off the boot option that is
currently turned on before you can turn on a different boot option.
• When using bsp-editor , only one of these options can be turned on at a time:
spl.boot.BOOT_FROM_
QSPI
,
spl.boot.BOOT_FROM_SDMMC
, or
spl.boot.BOOT_FROM_RAM
.
7-10
Available BSP Settings
ug-1137
2013.05.03
Altera Corporation
HPS Preloader User Guide