Altera SoC Embedded Design Suite - Manual (Page 173)

Option Required Description
--get-all
No
This option shows all the BSP settings values.
When using
--get-all,
you must also use
--
show-names
.
--show-names
No
This option only takes effect when used
together with
--get
or
--get-all
.
When used with one of these options, names
and values of the BSP settings are shown side-
by-side.
Related Information
BSP Settings on page 7-9
bsp-generate-files
The bsp-generate-files tool generates the files and settings stored in BSP settings file, as shown in the
following examples.
Example 7-5: Generating Files After BSP Creation
The following command creates a settings file based on the handoff folder, then generates the
Preloader source files based on those settings:
bsp-create-settings --type spl --bsp-dir . \
--settings settings.bsp \
--preloader-settings-dir \
../../hps_isw_handoff/
bsp-generate-files --settings settings.bsp --bsp-dir
Example 7-6: Generating Files After BSP Updates
bsp-update-settings --settings settings.bsp --set \
spl.debug.SEMIHOSTING 1
bsp-generate-files --settings settings.bsp --bsp-dir
Use the bsp-generate-files tool when BSP files need to be regenerated under one of the following
conditions:
• bsp-create-settings creates the PSP, but the --bsp-dir parameter was not specified, so PSP files were
not generated.
• bsp-update-settings updates the PSP, but the --bsp-dir parameter was not specified, so the files were
not updated.
• You want to ensure the BSP files are up-to-date
7-8 bsp-generate-files
ug-1137
2013.05.03
Altera Corporation HPS Preloader User Guide
Send Feedback