Embedded command shell, Embedded command shell -1 – Altera SoC Embedded Design Suite User Manual
Page 165
Embedded Command Shell
6
2014.12.15
ug-1137
The purpose of the embedded command shell is to provide an option for you to invoke the SoC EDS
tools. It enables you to invoke the SoC EDS tools without qualifying them with the full path. Commands
like ‘
eclipse
’, ‘
bsp-editor
’, or ‘
arm-altera-eabi-gcc
’ can be executed directly.
On Windows, the embedded command shell is started by running
Embedded_Command_Shell.bat
.
On Linux, the embedded command shell is started from the Start menu or by running
tion directory>/embedded_command_shell.sh
.
©
2014 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, ENPIRION, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are
trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as
trademarks or service marks are the property of their respective holders as described at
www.altera.com/common/legal.html
. Altera warrants performance
of its semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any
products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information,
product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device
specifications before relying on any published information and before placing orders for products or services.
www.altera.com
101 Innovation Drive, San Jose, CA 95134