3 chip card, 4 front view, Chip card – Pilz PNOZ m1p base unit User Manual
Page 7: Front view
Overview
Operating Manual PNOZ m1p (ETH)
20878-EN-12
7
}
Test pulse outputs used to monitor shorts across the inputs
}
Monitoring of shorts between the safety outputs
}
Expansion modules can be connected
(please refer to the document "PNOZmulti System Expansion" for details of the type
and number that can be connected)
}
Integrated interfaces:
–
m1p: Serial interface RS232
–
m1p ETH: 2 Ethernet interfaces
}
Plug-in connection terminals:
either spring-loaded terminal or screw terminal available as an accessory (see order
reference)
}
Coated version:
Increased environmental requirements (see Technical details)
Chip card
To be able to use the product you will need a chip card.
Chip cards are available with memories of 8 kByte and 32 kByte. For large-scale projects
we recommend the 32 kByte chip card (see Technical Catalogue: Accessories chapter).
Front view
PNOZ m1p
CHIP-Card
2.3
2.4