Pilz PNOZ m1p base unit - Manual (Page 27)

Operation
Operating Manual PNOZ m1p (ETH)
20878-EN-12
27
Internal error on the
base unit
Internal error on the
base unit
Internal error on the
expansion module
Base unit in a STOP
condition
External error on the
base unit inputs,
which does not lead
to a safe condition,
e.g. partially operat-
ed
External error on the
base unit outputs,
which does not lead
to a safe condition,
e.g. feedback input
defective
External error on the
inputs, which does
not lead to a safe
condition, e.g. par-
tially operated; feed-
back input defective
The fieldbus module
has not been recog-
nised.
Or
The base unit has
been identified via
the PNOZmulti Con-
figurator.
Error on cascading
input; unit remains
in a RUN condition
Error on cascading
output; unit remains
in a RUN condition