2 warranty and liability, 3 disposal, 4 for your safety – Pilz PNOZ m1p base unit User Manual
Page 11: Warranty and liability, Disposal, For your safety
Safety
Operating Manual PNOZ m1p (ETH)
20878-EN-12
11
Warranty and liability
All claims to warranty and liability will be rendered invalid if
}
The product was used contrary to the purpose for which it is intended
}
Damage can be attributed to not having followed the guidelines in the manual
}
Operating personnel are not suitably qualified
}
Any type of modification has been made (e.g. exchanging components on the PCB
boards, soldering work etc.).
Disposal
}
In safety-related applications, please comply with the mission time t
M
in the safety-relat-
ed characteristic data.
}
When decommissioning, please comply with local regulations regarding the disposal of
electronic devices (e.g. Electrical and Electronic Equipment Act).
For your safety
The unit meets all the necessary conditions for safe operation. However, you should always
ensure that the following safety requirements are met:
}
This operating manual only describes the basic functions of the unit. Information on ad-
vanced functions such as cascading can be found in the online help for the PNOZmulti
Configurator, in the PNOZmulti Communication Interfaces document and in the PNOZ-
multi technical catalogue. Only use these functions once you have read and understood
the documentation. All the necessary documentation can be found on the PNOZmulti
Configurator CD.
}
Adequate protection must be provided for all inductive consumers.
}
Do not open the housing or make any unauthorised modifications.
}
Please make sure you shut down the supply voltage when performing maintenance
work (e.g. exchanging contactors).
3.3.2
3.3.3
3.3.4