Pilz PNOZ m1p base unit - Manual (Page 29)

Technical Details
Operating Manual PNOZ m1p (ETH)
20878-EN-12
29
Technical Details
General 773100 773103 773104 773105
Approvals BG, CCC, CE,
GOST, KCC, KOS-
HA, TÜV, cULus
Listed
BG, CCC, CE,
GOST, KCC, TÜV,
cULus Listed
BG, CCC, CE,
GOST, TÜV, cULus
Listed
BG, CCC, CE,
GOST, KCC, KOS-
HA, TÜV, cULus
Listed
Electrical data 773100 773103 773104 773105
Supply voltage
for Supply to the sys-
tem
Supply to the sys-
tem
Supply to the sys-
tem
Supply to the sys-
tem
Voltage 24 V 24 V 24 V 24 V
Type DC DC DC DC
Voltage tolerance -15 %/+20 % -15 %/+20 % -15 %/+20 % -15 %/+20 %
Output of external
power supply
(DC)
8,0 W 9,0 W 9,0 W 8,0 W
Residual ripple
DC
5 % 5 % 5 % 5 %
Supply voltage
for Supply to the SC
outputs
Supply to the SC
outputs
Supply to the SC
outputs
Supply to the SC
outputs
Voltage 24 V 24 V 24 V 24 V
Type DC DC DC DC
Voltage tolerance -15 %/+20 % -15 %/+20 % -15 %/+20 % -15 %/+20 %
Residual ripple
DC
5 % 5 % 5 % 5 %
Potential isolation Yes Yes Yes Yes
Supply voltage
Power consump-
tion per expan-
sion module
2,50 W 2,50 W 2,50 W 2,50 W
Status indicator LED LED LED LED
Inputs 773100 773103 773104 773105
Number 20 20 20 20
Max. number of live
inputs within the
max. permitted am-
bient temperature
(see "Environmental
data")
U_B <= 26,4 V : 20,
U_B > 26,4 V : 15
U_B <= 26,4 V : 20,
U_B > 26,4 V : 15
U_B <= 26,4 V : 20,
U_B > 26,4 V : 15
U_B <= 26,4 V : 20,
U_B > 26,4 V : 15
Signal level at "0" -3 - +5 V DC -3 - +5 V DC -3 - +5 V DC -3 - +5 V DC
Signal level at "1" 15 - 30 V DC 15 - 30 V DC 15 - 30 V DC 15 - 30 V DC
Voltage at inputs 24 V DC 24 V DC 24 V DC 24 V DC
Input current at rated
voltage
8 mA 8 mA 8 mA 8 mA
Min. pulse duration 18 ms 18 ms 18 ms 18 ms
Pulse suppression 0,6 ms 0,6 ms 0,6 ms 0,6 ms
Maximum input delay 4 ms 4 ms 4 ms 4 ms
Potential isolation No No No No
8