Pilz PNOZ m1p base unit - Manual (Page 20)

Commissioning
Operating Manual PNOZ m1p (ETH)
20878-EN-12
20
Process data exchange
The RJ45 interfaces on the internal autosensing switch enable process data to be ex-
changed with other Ethernet subscribers within a network.
The product
m1p ETH can also be connected to Ethernet via a hub (hub or switch).
Ethernet
Hub/Switch Hub/Switch
Ethernet subscriber Ethernet subscriber
PNOZmulti base unit
with Ethernet interface
PNOZmulti base unit
with Ethernet interface
PC with PNOZmulti
Configurator
PNOZmulti as Ethernet subscriber - possible topologies
Preparing for operation
Function test during commissioning
ATTENTION!
It is essential to check that the safety devices operate correctly
– after the chip card has been exchanged
– after a project has been downloaded
– when the project has been deleted from the base unit's memory ("Re-
set Project" menu)
6.2.5
6.3
6.3.1