Xblue Networks X-50 User Manual

Page 98

Programming Wizard

XBLUE Networks

WA
N

Po
rt

ttin

For proper operation of Call Log - Dialed, Missed, and Received Calls, the home area

code, and automatic long distance insert, must be programmed into the Call Routing

Table.

Enter the home area code, where the system is located, such as 913 in the “From” and

“To”, then the maximum and minimum digits dialed will be 10, in both, then enter 3

digits to be deleted by the system before the number is dialed. Do not enter any digits

into the “Delete” parameter if all 10 digits should be dialed. Therefore, when a number

in the entered area code is dialed, the area code if there is an entry in the delete

parameter, in the example, 913, will be delete. The remaining 7 digits will be dialed.

The second entry will automatically enter a 1 for all other 10 digit numbers. Enter

“From 2”, “To 9”, Min=10, Max=10, Insert=1, and “Group” default is 1. When any

number that begins with 2 through 9, except 913, will receive a 1, when it is sent to

the telephone line.

Kansas

In Scottsdale Arizona, for example, any 10 digit number that is dialed with 480 as the

first three digits, 480 will be deleted. Any 10 digit number that has 602 and 623 as an

area code, all 10 digits will be dialed. All other 10 digit numbers regardless of area

code will receive a 1 before sending the call to the telephone line.

Scottsdale, AZ