Xblue Networks X-50 - Manual (Page 64)

Telephone Feature Description Table
64 XBLUE Networks
4
Fe
atur
e (Fle
xible) B
utt
on
Pr
ogr
ammi
ng
Feature (Flexible) Button Programming
Description:
The four buttons on the X2020 and any of the buttons on the Sidecar (DSS Console) can be reprogrammed to
accommodate a telephone PSTN or SIP Trunk Line, a feature or another extension. At default, the four buttons on
the telephone are set to the first four PSTN telephone lines (701, 702, 703, and 704) and all of the buttons on the
Sidecar are set to extensions 101~124.
Operation:
These features can be programmed using these codes or using a standard Internet Web Browser.
•
Dial *70 + BN + FT
•
BN = the button to be programmed; 01 - 04 on the telephone and 05 through 28 on the DSS Console,
going vertically down the left side, and then the right.
•
FT = the numeric value for the next 6 feature types:
•
00=Blank button
•
01=Extension; can be a physical LAN telephone
•
02=Trunk; can be either a PSTN or SIP Trunk or Trunk Group
•
03=Call Park; enter the call park dial code
•
04=Feature Key; enter the feature code such as *91 Agent log on
•
05=Others; such as a WAN extension, a speed dial number or a specific outside telephone number
•
06=Do Not Disturb; No need to enter *4 (Administrator can disable this feature)
•
07=Live Record
•
08=Virtual Mailbox (Virtual (Phantom) Extension - Group Mailbox)
Notes:
1. Most features can be programmed on a button
2. Some features require one button to enable and another to disable the feature
Examples:
Enter the following code to create a page button on button 4 - on the telephone:
Enter the following code to create a Call Park button on button 1 - on the telephone:
TABLE 4.1 Dialing Codes
BN Program BN Number Others Page Code
*70 04 05 400
TABLE 4.2 Dialing Codes
BN Program BN Number Call Park Park Location Code
*70 01 03 731