Xblue Networks X-50 - Manual (Page 39)

XBLUE Networks 39
Feature Description
Li
ne
Gr
ou
p
3
Line Group
Each telephone line in the X-50 is assigned to one of four line or trunk groups, which are used to group similar trunks
together. For example, all PSTN lines in group 1 and SIP trunks in group 2, etc.
Live Call Record
Also known as One Touch Record feature, which allows extension users to record the current conversation. Live Call
Record is extremely helpful for remembering telephone numbers or addresses when a pen and paper are not readily
available. The recording is placed in the user’s personal mailbox so that they may listen at a more convenient time.
This feature works with local (LAN) and remote (WAN) authenticated X2020 telephones.
This feature may violate privacy laws if used in a manner that is inconsistent with requirements of these laws.
Manufacturer assumes no responsibility with regard to the use of this feature. It is provided for the virtue of ethical
use only. The User is responsible for using this feature appropriately considering all applicable laws.
Meet Me Page
Meet me page allows an extension user to dial a code from any extension within the system and be connected to the
person that just completed a page. Once the call is established the paging port is released, and the two parties will
converse privately.
Message Waiting Indication (MWI)
Whenever a new voice mail message is left of for a SIP telephone endpoint the light bar above the LCD Display will
flash rapidly and the display will update to indicate that there is a message.
Music on Hold
The system has a prerecorded music on hold file that plays whenever a telephone line or SIP trunks is placed on hold.
Mutual Mailboxes (Group Mailbox)
A Mutual Mailbox is a special mailbox that can appear on multiple telephone extensions. This allows a group of
extension users to share access to the same mailbox. When a new message is left in the mailbox, all extensions with
the special mailbox button will light, indicating that there is a new voicemail message.
Navigation Keys
The X2020 come equipped with “cell phone like” navigation keys, which are used to scroll through features, lists and
programming parameters. They allow the user to go up, down, left, right, and the center key is used to select, say OK,
or confirm the parameter entry.