Xblue Networks X-50 - Manual (Page 110)

Advanced Programming
110 XBLUE Networks
7
Adv
anced Setup -
W
AN
Advanced Setup ‐ WAN
•
Device Info
•
Advanced
•
- WAN
•
- LAN
•
- NAT
•
- Parental Control
•
- Quality of Service
•
- Routing
•
- Dynamic DNS
Advanced ‐ WAN
Wide Area Network
At default, the WAN Port is set to Automatic Configuration - DHCP. Dynamic Host Control Protocol (DHCP) allows
the WAN Port of the X-50 to automatically receive an IP and Subnet Mask Address as well as locate and join the
network’s default gateway or router. However, this may have been changed during the Setup Wizard. At default,
the WAN port can be set to Automatic Configuration - DHCP, but it could be set to Static IP or PPPoE.