Xblue Networks X-50 - Manual (Page 137)

XBLUE Networks 137
Advanced Programming
Ro
ut
in
g
7
Static Routing
Static routing is used to establish IP Packet routing without requiring the devices to communicate with eachother. This
is considered a “no fault” network, because there is no way for the network to recover in the event of a failure.
•
Enter the Destination Network Address
•
Enter the Subnet Mask of the Destination Network Address
•
Enter the Gateway IP Address
•
Select if the routing will be sent through the WAN/eth0 or the LAN/br0
Select Static Route, and then select “Add” to the static routing address, select “save” to active the route.