StorCase Technology InfoStation 12-Bay 4U Ultra320/SATA User Manual
Page 98

InfoStation 12-Bay RAID User's Guide - Rev. D00
StorCase Technology, Inc.
RAID Controller Configuration
85
6.9.3 RTC
NOTE:
When using the RAID controller for the first time, users will need to set the RTC
Parameters. Setting the RTC parameters will enable the RTC function on the
controller. When an event occurs, the Log Event wil then be able to record the
event in real-time.
This function enables the user to adjust real-time clock settings.
6.9.3.1 Set RTC
Enter the time in MM/DD/YY W HH:MM format.
(MM = Month, DD=Day, YY=Year, W=Week, HH=Hour, MM=Minute)
6.9.3.2 Show RTC
Select to have time displayed on control panel.
6.9.3.2 Stop RTC
Select to turn off RTC.
6.A. Utility
6.A.1 Disk Self Test (DST)
This function enables the user to detect the disk's status.
6.A.1.1-6.A.1.2 Short Self Test or Extended Self Test
Select one of the two functions to do all disks or Disk 1-16 detection.