StorCase Technology InfoStation 12-Bay 4U Ultra320/SATA - Manual (Page 90)

InfoStation 12-Bay RAID User's Guide - Rev. D00 StorCase Technology, Inc.
RAID Controller Configuration 77
4.2.2 Pager 1 No.
Enter the first pager's terminal telephone number (also called the 'port number' or 'TAP port
number') and the pager PIN (if required). Maximum 16 characters.
4.2.3 Pager 2 No.
Enter the second pager's terminal telephone number (also called the 'port number' or 'TAP port
number') and the pager PIN (if required). Maximum 16 characters.
4.2.4 Code
NOTE: Pager alert messages may be up to 16 alphanumeric characters in length.
Enter the alert message for Pager 1 under Part 1. Enter the alert message for Pager 2 under
Part 2.
4.2.5 Repeat
Select either 5 (default), 10, 15, or 20. This is the number of times the alert message will be
sent.
4.2.6 Interval
Select either 5 (default), 10, 15, or 20. This is the interval (in minutes) at which the alert message
will be repeated.
4.2.7 Page Now
This function enables the user to send a test pager alert immediately.