beautypg.com

Lun mapping – StorCase Technology InfoStation 12-Bay 4U Ultra320/SATA User Manual

Page 59

background image

46

RAID Controller Configuration

StorCase Technology, Inc.

InfoStation 12-Bay RAID User's Guide - Rev. D00

LUN Mapping

1.

After the array and partitions have been created, each partition needs to be as-
signed a LUN and mapped to the appropriate SCSI Channel.

2.

to the Menu (left) side of the screen and press .

3.

Enter password (default password = 00000000).

4.

Select SCSI Params and press .

a.

Select the SCSI channel your host server is connected to (Primary or Sec-
ondary SCSI) and press .

b.

Select LUN MAP and press .

c.

Starting with LUN 0, assign one LUN number to each partition (slice).

Select LUN number and press .

d.

After selecting LUN number, select the array the partition is in and press
.

e.

Select the partition (slice) you would like to assign this LUN number to and
press (Figure 23).

Slices always start with “00” and increase sequentially according to the
number of partitions that have been created.

This manual is related to the following products: