StorCase Technology InfoStation 12-Bay 4U Ultra320/SATA User Manual
Page 38
InfoStation 12-Bay RAID User's Guide - Rev. D00
StorCase Technology, Inc.
RAID Controller Configuration
25
Figure 14: Data Master Create Array Screen
(Example shown, actual screen may vary)
2.
Select the desired Array number in the "Select Array" section.
3.
Select the desired RAID level in the "Select RAID Level" section.
4.
Select the desired stripe size in the "Stripe Size" field.
5.
Select either Random or Sequential in the "Select Performance" section.
6.
If any partition in any of the arrays is over 2TB capacity:
a.
Select Enable in the "Larger Than 2TB" section.
b.
Select the desired sector size in the "Sector Size" section. Partition sector size
depends on the OS.
7.
Select the quantity of disks for creating the Array in the "Number of Disk Drives" field.
Selected disks will display in both the "List" and "Physical View" sections.