StorCase Technology InfoStation 12-Bay 4U Ultra320/SATA - Manual (Page 69)

56 RAID Controller Configuration
StorCase Technology, Inc. InfoStation 12-Bay RAID User's Guide - Rev. D00
CUSTOMIZED RAID SETUP
NOTES: Please familiarize yourself with section "RAID Control Panel" on page 50
before proceeding with customized RAID setup.
Refer to sections "1 RAID Params" and "5 NVRAM" of this User's Guide for
further information.
1. Press to invoke the Password screen.
2. Enter password (default password = 00000000).
3. RAID configuration:
a. Use keys to select 1 RAID PARAMS. Press .
b. Select 1.1 Array 1 and press .
c. Select 1.1.1 Reconfig-RAID and press .
Select Yes and press .
d. Arrow down and select 1.1.2 RAID Level. Press .
Select x (x = desired RAID level) and press .
e. Arrow down and select 1.1.3 Disk Number. Press .
Select the number of disks to be used in the array and press .
NOTES: Any disks not selected for the array will automatically be added
as spares.
OS limitation is 2.0 TB maximum. However, multiple arrays or
partitions can be created to achieve over 2.0 TB capacity (e.g.
one array/partition with 2.0 TB, the other array/partition with
1.0 TB, or a combination thereof).
f . Press twice.